Trouble Burning Bootloader


#1

I have been trying to burn a boot loader to the signal generator for some time now. I have been getting consistent “Invalid Device Signature” Errors. I have triple and quadruple checked connections and used ArduinoIDE 1.0 and 1.5.8. I verified the ATMEGA328P-PU number and reloaded Arduino ISP multiple times after resetting it. I have attached pictures of wiring and error message with Verbose. My only other thought is that the Signal Generator may have something wrong(I hope not). Let me know if there are other troubleshooting methods I have overlooked.

Guy Shelley

Wayne State University

Detroit, Michigan

avrdude: Version 6.0.1, compiled on Apr 3 2014 at 23:12:16

Copyright © 2000-2005 Brian Dean, http://www.bdmicro.com/

Copyright © 2007-2009 Joerg Wunsch

System wide configuration file is “C:\Users\Gshelley\Downloads\arduino-1.5.8-windows\arduino-1.5.8/hardware/tools/avr/etc/avrdude.conf”

Using Port : COM8

Using Programmer : stk500v1

Overriding Baud Rate : 19200

avrdude: Send: 0 [30] [20]

avrdude: Send: 0 [30] [20]

avrdude: Send: 0 [30] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [10]

AVR Part : ATmega328P

Chip Erase delay : 9000 us

PAGEL : PD7

BS2 : PC2

RESET disposition : dedicated

RETRY pulse : SCK

serial program mode : yes

parallel program mode : yes

Timeout : 200

StabDelay : 100

CmdexeDelay : 25

SyncLoops : 32

ByteDelay : 0

PollIndex : 3

PollValue : 0x53

Memory Detail :

Block Poll Page Polled

Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack


eeprom 65 20 4 0 no 1024 4 0 3600 3600 0xff 0xff

Block Poll Page Polled

Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack


flash 65 6 128 0 yes 32768 128 256 4500 4500 0xff 0xff

Block Poll Page Polled

Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack


lfuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00

Block Poll Page Polled

Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack


hfuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00

Block Poll Page Polled

Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack


efuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00

Block Poll Page Polled

Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack


lock 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00

Block Poll Page Polled

Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack


calibration 0 0 0 0 no 1 0 0 0 0 0x00 0x00

Block Poll Page Polled

Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack


signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00

Programmer Type : STK500

Description : Atmel STK500 Version 1.x firmware

avrdude: Send: A [41] . [80] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [02]

avrdude: Recv: . [10]

avrdude: Send: A [41] . [81] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [01]

avrdude: Recv: . [10]

avrdude: Send: A [41] . [82] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [12]

avrdude: Recv: . [10]

avrdude: Send: A [41] . [98] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

Hardware Version: 2

Firmware Version: 1.18

Topcard : Unknown

avrdude: Send: A [41] . [84] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

avrdude: Send: A [41] . [85] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

avrdude: Send: A [41] . [86] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

avrdude: Send: A [41] . [87] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

avrdude: Send: A [41] . [89] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

Vtarget : 0.0 V

Varef : 0.0 V

Oscillator : Off

SCK period : 0.1 us

avrdude: Send: A [41] . [81] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [01]

avrdude: Recv: . [10]

avrdude: Send: A [41] . [82] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [12]

avrdude: Recv: . [10]

avrdude: Send: B [42] . [86] . [00] . [00] . [01] . [01] . [01] . [01] . [03] . [ff] . [ff] . [ff] . [ff] . [00] . [80] . [04] . [00] . [00] . [00] . [80] . [00] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [10]

avrdude: Send: E [45] . [05] . [04] . [d7] . [c2] . [00] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [10]

avrdude: Send: P [50] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [10]

avrdude: AVR device initialized and ready to accept instructions

Reading | avrdude: Send: V [56] 0 [30] . [00] . [00] . [00] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

avrdude: Send: V [56] 0 [30] . [00] . [01] . [00] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

################avrdude: Send: V [56] 0 [30] . [00] . [02] . [00] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

################################## | 100% 0.05s

avrdude: Device signature = 0x000000 (retrying)

Reading | avrdude: Send: V [56] 0 [30] . [00] . [00] . [00] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

avrdude: Send: V [56] 0 [30] . [00] . [01] . [00] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

################avrdude: Send: V [56] 0 [30] . [00] . [02] . [00] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

################################## | 100% 0.05s

avrdude: Device signature = 0x000000 (retrying)

Reading | avrdude: Send: V [56] 0 [30] . [00] . [00] . [00] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

avrdude: Send: V [56] 0 [30] . [00] . [01] . [00] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

################avrdude: Send: V [56] 0 [30] . [00] . [02] . [00] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

################################## | 100% 0.05s

avrdude: Device signature = 0x000000

avrdude: Yikes! Invalid device signature.

Double check connections and try again, or use -F to override

this check.

avrdude: Send: Q [51] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [10]

avrdude done. Thank you.

Error while burning bootloader.


#2

Do you have an Arduino UNO? If not, I would consider buying one and seeing if you can flash a bootloader to it. That should tell you if you have everything hooked up right and rule in/out the signal generator board as being the problem.

-Ryan

···

On Tue, Sep 5, 2017 at 2:28 PM, Guy Shelley shelle...@gmail.com wrote:

I have been trying to burn a boot loader to the signal generator for some time now. I have been getting consistent “Invalid Device Signature” Errors. I have triple and quadruple checked connections and used ArduinoIDE 1.0 and 1.5.8. I verified the ATMEGA328P-PU number and reloaded Arduino ISP multiple times after resetting it. I have attached pictures of wiring and error message with Verbose. My only other thought is that the Signal Generator may have something wrong(I hope not). Let me know if there are other troubleshooting methods I have overlooked.

Guy Shelley

Wayne State University

Detroit, Michigan

avrdude: Version 6.0.1, compiled on Apr 3 2014 at 23:12:16

Copyright © 2000-2005 Brian Dean, http://www.bdmicro.com/

Copyright © 2007-2009 Joerg Wunsch

System wide configuration file is “C:\Users\Gshelley\Downloads\arduino-1.5.8-windows\arduino-1.5.8/hardware/tools/avr/etc/avrdude.conf”

Using Port : COM8

Using Programmer : stk500v1

Overriding Baud Rate : 19200

avrdude: Send: 0 [30] [20]

avrdude: Send: 0 [30] [20]

avrdude: Send: 0 [30] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [10]

AVR Part : ATmega328P

Chip Erase delay : 9000 us

PAGEL : PD7

BS2 : PC2

RESET disposition : dedicated

RETRY pulse : SCK

serial program mode : yes

parallel program mode : yes

Timeout : 200

StabDelay : 100

CmdexeDelay : 25

SyncLoops : 32

ByteDelay : 0

PollIndex : 3

PollValue : 0x53

Memory Detail :

Block Poll Page Polled

Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack


eeprom 65 20 4 0 no 1024 4 0 3600 3600 0xff 0xff

Block Poll Page Polled

Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack


flash 65 6 128 0 yes 32768 128 256 4500 4500 0xff 0xff

Block Poll Page Polled

Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack


lfuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00

Block Poll Page Polled

Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack


hfuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00

Block Poll Page Polled

Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack


efuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00

Block Poll Page Polled

Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack


lock 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00

Block Poll Page Polled

Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack


calibration 0 0 0 0 no 1 0 0 0 0 0x00 0x00

Block Poll Page Polled

Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack


signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00

Programmer Type : STK500

Description : Atmel STK500 Version 1.x firmware

avrdude: Send: A [41] . [80] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [02]

avrdude: Recv: . [10]

avrdude: Send: A [41] . [81] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [01]

avrdude: Recv: . [10]

avrdude: Send: A [41] . [82] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [12]

avrdude: Recv: . [10]

avrdude: Send: A [41] . [98] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

Hardware Version: 2

Firmware Version: 1.18

Topcard : Unknown

avrdude: Send: A [41] . [84] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

avrdude: Send: A [41] . [85] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

avrdude: Send: A [41] . [86] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

avrdude: Send: A [41] . [87] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

avrdude: Send: A [41] . [89] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

Vtarget : 0.0 V

Varef : 0.0 V

Oscillator : Off

SCK period : 0.1 us

avrdude: Send: A [41] . [81] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [01]

avrdude: Recv: . [10]

avrdude: Send: A [41] . [82] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [12]

avrdude: Recv: . [10]

avrdude: Send: B [42] . [86] . [00] . [00] . [01] . [01] . [01] . [01] . [03] . [ff] . [ff] . [ff] . [ff] . [00] . [80] . [04] . [00] . [00] . [00] . [80] . [00] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [10]

avrdude: Send: E [45] . [05] . [04] . [d7] . [c2] . [00] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [10]

avrdude: Send: P [50] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [10]

avrdude: AVR device initialized and ready to accept instructions

Reading | avrdude: Send: V [56] 0 [30] . [00] . [00] . [00] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

avrdude: Send: V [56] 0 [30] . [00] . [01] . [00] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

################avrdude: Send: V [56] 0 [30] . [00] . [02] . [00] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

################################## | 100% 0.05s

avrdude: Device signature = 0x000000 (retrying)

Reading | avrdude: Send: V [56] 0 [30] . [00] . [00] . [00] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

avrdude: Send: V [56] 0 [30] . [00] . [01] . [00] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

################avrdude: Send: V [56] 0 [30] . [00] . [02] . [00] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

################################## | 100% 0.05s

avrdude: Device signature = 0x000000 (retrying)

Reading | avrdude: Send: V [56] 0 [30] . [00] . [00] . [00] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

avrdude: Send: V [56] 0 [30] . [00] . [01] . [00] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

################avrdude: Send: V [56] 0 [30] . [00] . [02] . [00] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

################################## | 100% 0.05s

avrdude: Device signature = 0x000000

avrdude: Yikes! Invalid device signature.

Double check connections and try again, or use -F to override

this check.

avrdude: Send: Q [51] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [10]

avrdude done. Thank you.

Error while burning bootloader.

You received this message because you are subscribed to the Google Groups “dropbot-dev” group.

To unsubscribe from this group and stop receiving emails from it, send an email to dropbot-dev+unsubscribe@googlegroups.com.

For more options, visit https://groups.google.com/d/optout.


#3

I tried an Arduino Uno and that did the trick. Thank you.

···

On Tuesday, September 5, 2017 at 2:28:13 PM UTC-4, Guy Shelley wrote:

I have been trying to burn a boot loader to the signal generator for some time now. I have been getting consistent “Invalid Device Signature” Errors. I have triple and quadruple checked connections and used ArduinoIDE 1.0 and 1.5.8. I verified the ATMEGA328P-PU number and reloaded Arduino ISP multiple times after resetting it. I have attached pictures of wiring and error message with Verbose. My only other thought is that the Signal Generator may have something wrong(I hope not). Let me know if there are other troubleshooting methods I have overlooked.

Guy Shelley

Wayne State University

Detroit, Michigan

avrdude: Version 6.0.1, compiled on Apr 3 2014 at 23:12:16

Copyright © 2000-2005 Brian Dean, http://www.bdmicro.com/

Copyright © 2007-2009 Joerg Wunsch

System wide configuration file is “C:\Users\Gshelley\Downloads\arduino-1.5.8-windows\arduino-1.5.8/hardware/tools/avr/etc/avrdude.conf”

Using Port : COM8

Using Programmer : stk500v1

Overriding Baud Rate : 19200

avrdude: Send: 0 [30] [20]

avrdude: Send: 0 [30] [20]

avrdude: Send: 0 [30] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [10]

AVR Part : ATmega328P

Chip Erase delay : 9000 us

PAGEL : PD7

BS2 : PC2

RESET disposition : dedicated

RETRY pulse : SCK

serial program mode : yes

parallel program mode : yes

Timeout : 200

StabDelay : 100

CmdexeDelay : 25

SyncLoops : 32

ByteDelay : 0

PollIndex : 3

PollValue : 0x53

Memory Detail :

Block Poll Page Polled

Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack


eeprom 65 20 4 0 no 1024 4 0 3600 3600 0xff 0xff

Block Poll Page Polled

Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack


flash 65 6 128 0 yes 32768 128 256 4500 4500 0xff 0xff

Block Poll Page Polled

Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack


lfuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00

Block Poll Page Polled

Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack


hfuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00

Block Poll Page Polled

Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack


efuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00

Block Poll Page Polled

Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack


lock 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00

Block Poll Page Polled

Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack


calibration 0 0 0 0 no 1 0 0 0 0 0x00 0x00

Block Poll Page Polled

Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack


signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00

Programmer Type : STK500

Description : Atmel STK500 Version 1.x firmware

avrdude: Send: A [41] . [80] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [02]

avrdude: Recv: . [10]

avrdude: Send: A [41] . [81] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [01]

avrdude: Recv: . [10]

avrdude: Send: A [41] . [82] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [12]

avrdude: Recv: . [10]

avrdude: Send: A [41] . [98] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

Hardware Version: 2

Firmware Version: 1.18

Topcard : Unknown

avrdude: Send: A [41] . [84] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

avrdude: Send: A [41] . [85] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

avrdude: Send: A [41] . [86] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

avrdude: Send: A [41] . [87] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

avrdude: Send: A [41] . [89] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

Vtarget : 0.0 V

Varef : 0.0 V

Oscillator : Off

SCK period : 0.1 us

avrdude: Send: A [41] . [81] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [01]

avrdude: Recv: . [10]

avrdude: Send: A [41] . [82] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [12]

avrdude: Recv: . [10]

avrdude: Send: B [42] . [86] . [00] . [00] . [01] . [01] . [01] . [01] . [03] . [ff] . [ff] . [ff] . [ff] . [00] . [80] . [04] . [00] . [00] . [00] . [80] . [00] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [10]

avrdude: Send: E [45] . [05] . [04] . [d7] . [c2] . [00] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [10]

avrdude: Send: P [50] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [10]

avrdude: AVR device initialized and ready to accept instructions

Reading | avrdude: Send: V [56] 0 [30] . [00] . [00] . [00] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

avrdude: Send: V [56] 0 [30] . [00] . [01] . [00] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

################avrdude: Send: V [56] 0 [30] . [00] . [02] . [00] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

################################## | 100% 0.05s

avrdude: Device signature = 0x000000 (retrying)

Reading | avrdude: Send: V [56] 0 [30] . [00] . [00] . [00] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

avrdude: Send: V [56] 0 [30] . [00] . [01] . [00] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

################avrdude: Send: V [56] 0 [30] . [00] . [02] . [00] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

################################## | 100% 0.05s

avrdude: Device signature = 0x000000 (retrying)

Reading | avrdude: Send: V [56] 0 [30] . [00] . [00] . [00] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

avrdude: Send: V [56] 0 [30] . [00] . [01] . [00] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

################avrdude: Send: V [56] 0 [30] . [00] . [02] . [00] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

################################## | 100% 0.05s

avrdude: Device signature = 0x000000

avrdude: Yikes! Invalid device signature.

Double check connections and try again, or use -F to override

this check.

avrdude: Send: Q [51] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [10]

avrdude done. Thank you.

Error while burning bootloader.


#4

No problem.

···

On Thu, Sep 7, 2017, 9:51 AM Guy Shelley shelle...@gmail.com wrote:

I tried an Arduino Uno and that did the trick. Thank you.

On Tuesday, September 5, 2017 at 2:28:13 PM UTC-4, Guy Shelley wrote:

I have been trying to burn a boot loader to the signal generator for some time now. I have been getting consistent “Invalid Device Signature” Errors. I have triple and quadruple checked connections and used ArduinoIDE 1.0 and 1.5.8. I verified the ATMEGA328P-PU number and reloaded Arduino ISP multiple times after resetting it. I have attached pictures of wiring and error message with Verbose. My only other thought is that the Signal Generator may have something wrong(I hope not). Let me know if there are other troubleshooting methods I have overlooked.

Guy Shelley

Wayne State University

Detroit, Michigan

avrdude: Version 6.0.1, compiled on Apr 3 2014 at 23:12:16

Copyright © 2000-2005 Brian Dean, http://www.bdmicro.com/

Copyright © 2007-2009 Joerg Wunsch

System wide configuration file is “C:\Users\Gshelley\Downloads\arduino-1.5.8-windows\arduino-1.5.8/hardware/tools/avr/etc/avrdude.conf”

Using Port : COM8

Using Programmer : stk500v1

Overriding Baud Rate : 19200

avrdude: Send: 0 [30] [20]

avrdude: Send: 0 [30] [20]

avrdude: Send: 0 [30] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [10]

AVR Part : ATmega328P

Chip Erase delay : 9000 us

PAGEL : PD7

BS2 : PC2

RESET disposition : dedicated

RETRY pulse : SCK

serial program mode : yes

parallel program mode : yes

Timeout : 200

StabDelay : 100

CmdexeDelay : 25

SyncLoops : 32

ByteDelay : 0

PollIndex : 3

PollValue : 0x53

Memory Detail :

Block Poll Page Polled

Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack


eeprom 65 20 4 0 no 1024 4 0 3600 3600 0xff 0xff

Block Poll Page Polled

Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack


flash 65 6 128 0 yes 32768 128 256 4500 4500 0xff 0xff

Block Poll Page Polled

Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack


lfuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00

Block Poll Page Polled

Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack


hfuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00

Block Poll Page Polled

Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack


efuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00

Block Poll Page Polled

Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack


lock 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00

Block Poll Page Polled

Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack


calibration 0 0 0 0 no 1 0 0 0 0 0x00 0x00

Block Poll Page Polled

Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack


signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00

Programmer Type : STK500

Description : Atmel STK500 Version 1.x firmware

avrdude: Send: A [41] . [80] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [02]

avrdude: Recv: . [10]

avrdude: Send: A [41] . [81] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [01]

avrdude: Recv: . [10]

avrdude: Send: A [41] . [82] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [12]

avrdude: Recv: . [10]

avrdude: Send: A [41] . [98] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

Hardware Version: 2

Firmware Version: 1.18

Topcard : Unknown

avrdude: Send: A [41] . [84] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

avrdude: Send: A [41] . [85] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

avrdude: Send: A [41] . [86] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

avrdude: Send: A [41] . [87] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

avrdude: Send: A [41] . [89] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

Vtarget : 0.0 V

Varef : 0.0 V

Oscillator : Off

SCK period : 0.1 us

avrdude: Send: A [41] . [81] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [01]

avrdude: Recv: . [10]

avrdude: Send: A [41] . [82] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [12]

avrdude: Recv: . [10]

avrdude: Send: B [42] . [86] . [00] . [00] . [01] . [01] . [01] . [01] . [03] . [ff] . [ff] . [ff] . [ff] . [00] . [80] . [04] . [00] . [00] . [00] . [80] . [00] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [10]

avrdude: Send: E [45] . [05] . [04] . [d7] . [c2] . [00] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [10]

avrdude: Send: P [50] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [10]

avrdude: AVR device initialized and ready to accept instructions

Reading | avrdude: Send: V [56] 0 [30] . [00] . [00] . [00] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

avrdude: Send: V [56] 0 [30] . [00] . [01] . [00] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

################avrdude: Send: V [56] 0 [30] . [00] . [02] . [00] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

################################## | 100% 0.05s

avrdude: Device signature = 0x000000 (retrying)

Reading | avrdude: Send: V [56] 0 [30] . [00] . [00] . [00] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

avrdude: Send: V [56] 0 [30] . [00] . [01] . [00] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

################avrdude: Send: V [56] 0 [30] . [00] . [02] . [00] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

################################## | 100% 0.05s

avrdude: Device signature = 0x000000 (retrying)

Reading | avrdude: Send: V [56] 0 [30] . [00] . [00] . [00] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

avrdude: Send: V [56] 0 [30] . [00] . [01] . [00] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

################avrdude: Send: V [56] 0 [30] . [00] . [02] . [00] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [00]

avrdude: Recv: . [10]

################################## | 100% 0.05s

avrdude: Device signature = 0x000000

avrdude: Yikes! Invalid device signature.

Double check connections and try again, or use -F to override

this check.

avrdude: Send: Q [51] [20]

avrdude: Recv: . [14]

avrdude: Recv: . [10]

avrdude done. Thank you.

Error while burning bootloader.

You received this message because you are subscribed to the Google Groups “dropbot-dev” group.

To unsubscribe from this group and stop receiving emails from it, send an email to dropbot-dev...@googlegroups.com.

For more options, visit https://groups.google.com/d/optout.