Hardware   DropBot v2

About the DropBot v2 category (1)
New DropBot usage (3)
Lack of droplet movement (7)
Parallel channel DMF (3)
MicroDrop can't connect to DropBot (12)
trouble at plug-in istallation (4)
BaseNode library v 0.2 missing? (3)
HV Switching board (5)
Output voltage requirement for amplifier in Dropbot (3)
Signal Generator testing (2)
Behavior after 50kHz max. frequency calibration (5)
Arduino driver issues (6)
Low output voltage in 2nd set of DropBot system (7)
Can't recognize dropbot. (1)
Trouble Burning Bootloader (4)
HV Switching Board Calibration Issue (5)
Strange Results From Switching Board Test (2)
Higher than 200V output (3)
Powering the DropBot (16)
no signal from signal generator board on power supply (13)
DropBot not being detected by MicroDrop (12)
Hello World in Drop-Dev (1)
Questions about calibration of signal generate board (1)
Amplifier Instruction Questions (4)
Control Board doesn't appear to be powered when piggy backed on to Arduino (4)
Step Missing in the Build Instructions (2)
**After flashing of the firmware comes this error!** (5)
Dropbot assembly problem (3)
Low voltage detected and Error (return code=8) (7)
Weird problem: devices working - not working - working - ... (5)