Add-on modules Topics related to DropBot add-on modules (e.g., magnetic separation, temperature control, sensors, etc.). DropBot v3 Topics about the <a href="http://sci-bots.com/dropbot">DropBot v3</a> instrument developed and sold by <a href="http://sci-bots.com">Sci-Bots</a>. DropBot v2 Topics about the DropBot v2 described in detail on the <a href="http://microfluidics.utoronto.ca/dropbot/">Wheeler Microfluidics wiki</a>.
About the Hardware category [Hardware] (1)
HV Switching board chips [Hardware] (2)
Velocity and Feedback Results [DropBot v3] (2)
Dropbot 3 design files? [DropBot v3] (3)
Cost breakdown to make a dropbot [Hardware] (3)
Magnetic separation module [Add-on modules] (1)
New DropBot usage [DropBot v2] (3)
Lack of droplet movement [DropBot v2] (7)
Parallel channel DMF [DropBot v2] (3)
MicroDrop can't connect to DropBot [DropBot v2] (12)
trouble at plug-in istallation [DropBot v2] (4)
BaseNode library v 0.2 missing? [DropBot v2] (3)
Running Self-testing Startup Troubleshooting [DropBot v3] (6)
HV Switching board [DropBot v2] (5)
Output voltage requirement for amplifier in Dropbot [DropBot v2] (3)
Signal Generator testing [DropBot v2] (2)
Behavior after 50kHz max. frequency calibration [DropBot v2] (5)
Arduino driver issues [DropBot v2] (6)
Low output voltage in 2nd set of DropBot system [DropBot v2] (7)
Can't recognize dropbot. [DropBot v2] (1)
Trouble Burning Bootloader [DropBot v2] (4)
HV Switching Board Calibration Issue [DropBot v2] (5)
Strange Results From Switching Board Test [DropBot v2] (2)
Higher than 200V output [DropBot v2] (3)
Powering the DropBot [DropBot v2] (16)
no signal from signal generator board on power supply [DropBot v2] (13)
DropBot not being detected by MicroDrop [DropBot v2] (12)
Hello World in Drop-Dev [DropBot v2] (1)
Questions about calibration of signal generate board [DropBot v2] (1)
Amplifier Instruction Questions [DropBot v2] (4)